RGBW

DYNAMIC COLOUR

                 

                           

           

A flexible linear LED tape manufactured using a durable copper PCB with on-board constant current integrated circuit (IC) to ensure precise current control, whilst Schottky diodes protect against reverse polarity.

High quality Nichia LEDs deliver superior performance, whilst single bin selection and 3-step MacAdam colour consistency ensure imperceptible colour and brightness variation. A thermally conductive adhesive tape guarantees perfect heat transfer to the profile. Designed for professional interior lighting applications where stable, consistent and reliable performance is required.

Technical

LED: 48 RGB + 48 White Nichia LED/m
LED Pitch: 20.83mm & 4.6mm
PCB width: 10mm
PCB Cutting steps: 125mm
Output power: 9.6w/m ~ 24w/m
Input voltage: 24VDC [22.5~25VDC]
Current control: On-board integrated controller (IC)
Reverse polarity protection: On-board Schottky diode
Operating temperature (Ta): -25 °C ~ 50 °C
PCB Temperature (Tc max): <75 °C
Dimmable: 0/1-10V / DALI / DMX / ELV / PWM /TRIAC
Lumen maintenance: L90B10 ≥60,000 Hours @Tj <75°C, 25°C Ambient
Beam angle: 120 (cosine)

Drawing

Lumen Outputs

Disclaimer:

Technical data is subject to change without prior notice. The data provide represent typical values. Due to tolerances in the production of components and binning of LEDs, values for lumen output (Lm), colour temperature (CCT) and power (W/m) can vary by up to 10%. Electrical and thermal variation also influences the performance characteristics of LEDs.