MONOFLEX

D175

STATIC WHITE

                 

                 

        

A flexible linear LED tape manufactured using a durable copper PCB with resistor-based current control.

High-quality Osram or Lumileds LEDs deliver excellent performance, whilst single bin selection and 3-step MacAdam colour consistency ensure imperceptible colour and brightness variation. A thermally conductive adhesive tape guarantees perfect heat transfer to the profile. Designed for professional interior lighting applications where stable, consistent and reliable performance is required.

Datasheet

Technical

LED: 175 Osram or Lumileds LED/m
LED Pitch: 5.71mm
PCB width: 5mm
PCB Cutting steps: 40mm
Output power: 2.4w/m ~ 19.2w/m
Input voltage: 24VDC [22.5~25VDC]
Current control: Current limiting resistors
Reverse polarity protection: On-board Schottky diode
Operating temperature (Ta): -25 °C ~ 50 °C
PCB Temperature (Tc max): <75 °C
Dimmable: 0/1-10V / DALI / DMX / ELV / PWM /TRIAC
Lumen maintenance: L70B50 ≥50,000 Hours @Tj <75°C, 25°C Ambient
Beam angle: 120 (cosine)

Drawing

Lumen Outputs

Disclaimer:

Technical data is subject to change without prior notice. The data provide represent typical values. Due to tolerances in the production of components and binning of LEDs, values for lumen output (Lm), colour temperature (CCT) and power (W/m) can vary by up to 10%. Electrical and thermal variation also influences the performance characteristics of LEDs.