A flexible and dynamic (RGB + White) linear LED tape manufactured using a durable copper 4-circuit PCB with on-board constant current integrated circuit (IC) to ensure precise current control, whilst Schottky diodes protect against reverse polarity.

Utilising 48 Osram RGB tri-chip LED + 48 Osram white LED per metre. Designed for professional interior lighting applications where stable, consistent and reliable performance is required.

The RGBW PCB incorporates four circuits, enabling each colour to be individually controlled, in conjunction with an appropriate control system.


//  Osram & Lumileds LEDs

//  Dynamic colour mixing

//  24vdc input voltage (SELV)

//  48 RGB + 48 White LEDs - 125mm cutting steps

//  14.4w/m / 19.2w/m / 24w/m

//  Up to 1582 lumens/m

//  3 Step MacAdam LEDs

//  CRI ≥Ra80 (Osram) or ≥Ra90 (Lumileds)

//  11.5mm wide copper PCB with constant current IC

//  Schottky diodes for reverse polarity protection

//  Thermal conductive adhesive tape for better heat conduction




Technical data is subject to change without prior notice. The data provide represent typical values. Due to tolerances in the production of components and binning of LEDs, values for lumen output (Lm), colour temperature (CCT) and power (W/m) can vary by up to 10%. Electrical and thermal variation also influences the performance characteristics of LEDs.