MONOFLEX-N168

 

A flexible linear LED tape manufactured using a durable copper PCB with on-board constant current integrated circuit (IC) to ensure precise current control, whilst Schottky diodes protect against reverse polarity.

High quality Nichia LEDs deliver superior performance, whilst single bin selection and 3-step MacAdam colour consistency ensure imperceptible colour and brightness variation. A thermally conductive adhesive tape guarantees perfect heat transfer to the profile.

Designed for professional interior lighting applications where stable, consistent and reliable performance is required.

Features

//  Nichia LEDs

//  24vdc input voltage (SELV)

//  168 LEDs/m - 41.65mm cutting steps

//  7.2w/m / 9.6w/m / 14.4w/m / 19.2w/m / 24w/m / 33.4w/m / 48w/m

//  Up to 7144 lumens/m

//  3 Step MacAdam LEDs

//  CRI ≥Ra80  / ≥Ra90 / ≥Ra95

//  8mm wide copper PCB with constant current IC

//  Schottky diodes for reverse polarity protection

//  Thermal conductive adhesive tape for better heat conduction

Drawing

Technical

Disclaimer:

Technical data is subject to change without prior notice. The data provide represent typical values. Due to tolerances in the production of components and binning of LEDs, values for lumen output (Lm), colour temperature (CCT) and power (W/m) can vary by up to 10%. Electrical and thermal variation also influences the performance characteristics of LEDs.