MONOFLEX AQUA - AN56

 

A flexible linear IP67 LED tape manufactured using a durable copper PCB with an on-board constant current integrated circuit (IC) to ensure precise current control, whilst Schottky diodes protect against reverse polarity.

High-quality Nichia LEDs deliver superior performance, whilst single bin selection and 3-step MacAdam colour consistency ensure imperceptible colour and brightness variation. 

The flexible housing is waterproof, UV, salt and solvent resistant, it does not attract dirt and is easy to mount and clean. Designed for professional interior or exterior lighting applications where stable, consistent and reliable performance is required.

 

Features

//  Nichia LEDs

//  24vdc input voltage (SELV)

//  56 LEDs/m - 125mm cutting steps

//  4.8w/m / 9.6w/m / 14.4w/m

//  3 Step MacAdam LEDs

//  CRI ≥Ra80  / ≥Ra90 / ≥Ra95

//  8mm wide copper PCB with constant current IC

//  Schottky diodes for reverse polarity protection

//  IP67 - UV, Salt & Solvent Resistant

Drawing

Technical

Disclaimer:

Technical data is subject to change without prior notice. The data provide represent typical values. Due to tolerances in the production of components and binning of LEDs, values for lumen output (Lm), colour temperature (CCT) and power (W/m) can vary by up to 10%. Electrical and thermal variation also influences the performance characteristics of LEDs.